Recent questions tagged continuous-time-signals

A $230\: V$ rms source supplies power to two loads connected in parallel. The first load draws $10 \: kW$ at $0.8$ leading power factor and the second one draws $10\: kVA...

Consider a discrete time periodic signal $x[n] = \sin(\frac{\pi n}{s}).$ Let $a_{k}$ be the complex Fourier series coefficients of $x[n].$ The coefficients $\{a_{k}\}$ ar...

The state diagram of a system is shown below. A system is described by the state-variable equations$$\dot{X}= AX+Bu;\:\: y = CX+Du$$The state-variable equations of the sy...

The impulse response of a continuous time system is given by $h(t) = \delta(t-1) + \delta(t-3).$ The value of the step response at $t = 2$ is $0$$1$$2$$3$

Let $g(t) = e^{-\pi t^{2}},$ and $h(t)$ is a filter matched to $g(t).$ If $g(t)$ is applied as input to $h(t),$ then the Fourier transformation of the output is$ e^{-\pi ...

Which one of the following statements is NOT TRUE for a continuous time causal and stable LTI system? All the poles of the system must lie on the left side of the $j\omeg...

A band-limited signal with a maximum frequency of $5\: kHz$ is to be sampled. According to the sampling theorem, the sampling frequency which is not valid is$5\: kHz $$12...

For a periodic signal $v(t) = 30\sin100\:t + 10\cos300\:t + 6\sin(500\:t+\pi/4),$ the fundamental frequency in $rad/s$ is$100$$300$$500$$1500$

The impulse response of a system is $h(t) = tu(t).$ For an input $u(t − 1),$ the output is$\frac{t^{2}}{2}u(t)$$\frac{t(t-1)}{2}u(t-1)$$\frac{(t-1)^{2}}{2}u(t-1)$$\frac{t...

Two systems with impulse responses $h_{1}(t)$ and $h_{2}(t)$ are connected in cascade. Then the overall impulse response of the cascaded system is given by product of $...

Let $y[n]$ denote the convolution of $h[n]$ and $g[n]$, where $h[n]=(\frac{1}{2})^nu[n]$ and $g[n]$ is a casual sequence. If $y[0]=1$ and $y =\frac{1}{2}$, then $g $ equa...

The circuit shown is a low pass filter with $f_{3\:dB}=\frac{1}{(R_1+R_2)C}\: rad/s$high pass filter with $f_{3\:dB}=\frac{1}{R_1C}\: rad/s$low pass filter with $f_{3\:dB...

The state variable description of an LTI system is given by$$\begin{pmatrix} \dot{x_1}\\ \dot{x_2}\\ \dot{x_3} \end{pmatrix}=\begin{pmatrix} 0 & a_1 & 0\\ 0 & 0 & a_2\\a_...

The Fourier transform of a signal $h(t)$ is $H(j\omega)=(2\cos\omega)(\sin2\omega)/\omega$. The value of $h(0)$ is$\frac{1}{4}$$\frac{1}{2}$$1$$2$

A band limited low-pass signal $x(t)$ of bandwidth $5\:kHz$ is sampled at a sampling rate $f_{s}$.The signal $x(t)$ is reconstructed using the reconstruction filter $H(f)...

Let $\text{x(t)}$ be a periodic function with period $\text{T = 10}$.The Fourier series coefficients for this series are denoted by $a_{k},$ that is$$x\left ( t \right )=...

A discrete-time all-pass system has two of its poles at $0.25\angle 0^{\circ}$ and $2\angle 30^{\circ}$. Which one of the following statements about the system is TRUE?It...

The signal $x(t)=\sin (14000\pi t)$, where $t$ is in seconds, is sampled at a rate of $9000$ samples per second. The sampled signal is the input to an ideal lowpass filte...

Consider the parallel combination of two LTI systems shown in the figure.The impulse responses of the systems are $$ \begin{array} {} h_1(t)=2\delta (t+2)-3\delta (t+1) \...

Consider the state space realization $\begin{bmatrix} \dot{x_1}(t)\\ \dot{x_2}(t) \end{bmatrix}=\begin{bmatrix} 0 &0 \\ 0&-9 \end{bmatrix}\begin{bmatrix} x_1(t...

The input $x(t)$ and the output $y(t)$ of a continuous –time system are related as $$y(t)=\int_{t-T}^{t}x(u) du.$$ The system islinear and time-variantlinear and time-i...

An LTI system with unit sample response $h[n]=5\delta [n]-7\delta [n-1]+7\delta [n-3]-5\delta [n-4]$ is a low-pass filter high-pass filter band-pass filter band-s...

A continuous time signal $x(t)=4 \cos(200\pi t)+8 \cos(400\pi t)$, where $t$ is in seconds, is the input to a linear time invariant (LTI) filter with the impulse response...

Let $x(t)$ be a continuous time periodic signal with fundamental period $T=1$ seconds.Let ${a_{k} }$ be the complex Fourier series coefficients of $x(t)$, where $k$ is in...

Let $h[n]$ be the impulse response of a discrete-time linear time invariant(LTI) filter. The impulse response is given by $$h[0]=\frac{1}{3}; \, h =\frac{1}{3}; \, h =\fr...

Two discrete-time signals $x[n]$ and $h[n]$ are both non-zero only for $n=0,1,2$, and are zero otherwise .It is given that$$x[0]=1, \: x =2, \: x =1, \: h[0]=1$$ Let $y[n...

A periodic signal $x(t)$ has a trigonometric Fourier series expansion$$x( t )= a_{0}+\sum_{n=1}^{ \infty } ( a_{n} \cos n\omega _{0}t+b_{n}\sin n\omega _{0}t )$$If $x(t)=...

Consider a single input single output discrete-time system with $x[ n ]$ as input and $y [ n ]$ as output, where the two are related as$$y [ n ]= \begin{cases} n \mid x [...

Consider the following statements for continuous-time linear time invariant (LTI) systems.There is no bounded input bounded output (BIBO) stable system with a pole in the...